DVI-D USB 1.1 Extender

The ACS2500A DVI-D extender is the ideal high resolution extender. It preserves the quality of your DVI video data offering real-time transmission without delays and without compression. The result are crystal clear picture up to a reolsuion of 1920x1600 or 1080p.

The extender transmits the DVI 1.0 compliant video data and the USB1.1 data of your workstation over only one optical multimode fibre up to 400 metres.

Transparent USB1.1 extension is provided for up to four USB1.1 compatible devices. Even USB2.0 devices can be attached and will work in USB1.1 mode.
True EDID information is supported from the attached display to guarantee optimum plug-and-play support. Even HDCP protocols can be supported that way.

The ideal high-resolution extender
The ACS2500A DVI-D extender preserves the quality of your DVI video data and because it is real-time transmission, no delays and no compression will degrade the high-resolution viewing experience.

State-of-the-art technology saves fibres
The transmitter uses six optical infrared lasers operating at different colours of light (CWDM) to convert the DVI 1.0 compliant video data and the USB1.1 data of your workstation to pulses of laser light, which travel along one optical multimode fibre. The receiver at the other end of the fibre can be placed up to 400 metres away.

Transparent USB 1.1 support
ACS2500A provides transparent USB1.1 extension for up to four USB1.1 compatible devices. Even USB2.0 devices can be attached and will work in USB1.1 mode with up to 12 Mbps transfer rate given that they are backward compatible to USB 1.1.

Transparent DDC channel
With its transparent DDC channel, true EDID information is received from the attached display to guarantee optimum plug-and-play support. Even HDCP® protocol can be supported that way.

Optical —
Wavelength: 6 ch. CWDM 725 to 925 nm
Interface: SC connector
TX unit output laser class 1M;
RX unit output laser class 1;
Designed for 50µm/125µm multimode fibre, preferred OM3.
Link distance using 62.5µm/125µm fibre is reduced to 180m

Connectors —
Local Unit: (1) USB Type B F; (2) DVI-D F (24+1); (1) SC Simplex
Remote Unit: (4) USB Type A F; (1) DVI-D F; (1) SC Simplex; (1) 2.1/5.5mm Barrel (Power)

Indicators — RX and TX: (4) Status LEDs

Power — RX unit, 12V/24W, barrel connector 2.1/5.5 mm, 90 to 264 VAC, 47 to 63 Hz, IEC320 inlet

Size — 4H x 10.6W x16.3D cm; (4 units will fit into 19"/1U)

Weight — 0.3 kg

(1) TX unit ;
(1) RX unit;
(1) USB A-B cord;
(1) DVI-D cord, 1.8 m;
(1) Power supply;
(1) Power cord IEC320;
(1) User manual;