Das halogenfreie Kabel ist ideal geeignet für öffentliche Bereiche, Transportsysteme, Fabriken und andere Anwendungen in denen der Schutz vor giftigen und korrosiven Gasen unerlässlich ist. Der halogenfreien Mantel hat ausgezeichnete Feuer- und Sicherheitsmerkmale, so dass weniger Rauch entsteht und die Emission von Gasen sehr niedrig ist. Diese hochwertige Kabel mit einem massiven Kern kann für Ethernet, Fast Ethernet, Gigabit Ethernet, Power over Ethernet (PoE), CATx und andere anspruchsvolle Verkabelungen verwendet werden.
a
Dieses Kabel übertrifft die Anforderungen des CAT5e Standards in Bezug auf die Einfügungsdämpfung, Übersprechen und Rückflussdämpfung. Es wurde in unabhängigen Labors geprüft und erfüllt eine breite Palette von Elektro-und Sicherheitsstandards einschließlich ISO/IEC11801, CENELEC EN50173-1:2011 und ANSI/TIA-568-C2 für alle Innenanwendungen.
Environmental — RoHS / RoHS2 Compliant
CE — LVD (2006/95/EC), RoHS2(2011/65/EC)
Construction — 24 AWG Solid Bare Copper Twisted-Pair Conductors, Polyethylene Insulation, F/UTP Overall Foil Screen with Drain Wire, LSZH Jacket
Applicable Standards
Electrical —
2.2 edition ISO/IEC 11801, Cat.5;
CENELEC EN 50173-1:2011, Cat.5;
ANSI/TIA-568-C.2, Cat.5e;
2nd edition IEC61156-5, Cat.5e-Level 2, Type 2, Grade 2;
2nd CENELEC EN 50288-2-1
Safety —
CENELEC EN 60332-1-2 / IEC 60332-1-2;
CENELEC EN 50268-1 / IEC 61034-1;
CENELEC EN 50268-2 / IEC 61034-2, inc1. Amendment 1;
CENELEC EN 50267-2-3 / IEC 60754-2
Materials/Construction —
CENELEC EN 60811-1-1, clause 9.2 / IEC 60811-1-1, clause 9.2.7;
CENELEC EN 60811-1-3, clause 10 / IEC 60811-1-3, clause 10;
CENELEC EN 60811-3-1, clause 9.2 / IEC 60811-3-1, clause 9.2;
CENELEC EN 60811-1-2, clause 8.1 / IEC 60811-1-2, clause 8.1;
CENELEC EN 50290-2-27, CENELEC EN 50290-2-23
Physical
Conductors —
Material 24AWG Solid Bare Copper;
Diameter 0.540 ± 0.02 mm
Insulation —
Material HDPE;
Diameter 1.06 ± 0.02mm
Shielding —
Mylar Tape PET (20 x 0.025mm);
Drain Wire Stranded Tinned Copper (1/0.48mm);
Al-Mylar Tape Laminated Aluminium-Polyester (20 x 0.063mm)
Jacket —
Material: LSZH;
Diameter: 6.1 ± 0.2mm;
Colour: Blue, Green, Red, Yellow, Purple
Packaging — Wooden Spool
Temperature —
Installation -20°C up to +60°C;
Operation 0°C up to +60°C
Min Bend Radius —
Installation 6 x overall diameter;
Operation 4 x overall diameter
Max Pulling Tension — 90 N
Flame Retardance — IEC 60332-1-2
Electrical Characteristics at 20°C
Characteristic Impedance at 100 MHz — 100 ± 15 Ohm
Maximum Conductor DC Resistance — 93.8 Ohm/km
Mutual Capacitance — 56 nF/km
Maximum Capacitance — 330pF/100m (Unbalanced Pair to Ground)
Maximum Propagation Delay — 536 ns/100m
Maximum Delay Skew — 45 nS/100m
Max. Operating Voltage — 300 V rms